Originally posted by RichardWolowicz
Would be nice to see settings ... I have a hard time getting my HDS units with SS to see anything in less than 15 ft of water.

Anybody with any setup tips ?
Richard, I don't change the default settings on my StructureScan much at all. Out of the box it performs execptionally well. I found I didn't have to adjust it near as much as traditional sonar.

The only thing I really play with is the frequency and contrast. I don't have a rule of thumb as to when to use either frequency, but I have found recently that using both over the same piece of structure can reveal different things.

As far as contrast, adjust that like you adjust your sensitivity. Usually between 50-80% is where I have mine.